Product Catalog

Slurry pumps

Model No.︰	HZJ-05
Brand Name︰	HB
Country of Origin︰	China
Unit Price︰	US $ 6000 / pc
Minimum Order︰	1 pc

Total 15 Related Items

Product Description

Centrifugal slurry pump

Complies to API610, 682, ISO2858standards
Max pressure: 2.5MPa
Capacity: 4~3240 m3/h
Head: 7~115m
Model: HZJ series chemical slurry pump
T: -20---200oC
Material (For wet parts in contact with medium): CS, cast iron, 304(0Cr18Ni99ti), 305 (1cr18ni9t), MCU, CD4MCu, 316, 316L, 310S, alloy 20#, 904, ta2, Ti/pd (titanium-palladium alloy), Ni (nickel), Monel. Dual-phase stainless steel, etc.

These materials have been selected as a result of many years of experience in the use of chemical engineering material, to satisfy the special demands made in pump construction.

Application：

chemical industry

pulp and paper

metallurgy fertilizer

salt mining industry

environment protection

The pump are designed for conveying slurry that contains less than 30% solids, conform ISO 5199 standard, is the ideal equipment matched with filter press, and best conveying equipment for abrasive molds, desulfurization in power plants,bauxite slurry and fluids contain hard sundries.

Material:

Wetted parts comply to ASTM standard, common material as follows:

High-chromium alloy

Duplex stainless steel

Titanium alloy

Operating data:

Flow rate（2~1000）m³/h

Total heads(8~100)m

Operating temperature(-20~175)℃

Standard conditions at site：

Relative humidity during continuous operation max. 90%

Ambient temperature max.40°C,min.4°C Permissible altitude up to 1000m above sea level

Flow rate：

The permissible operating range of centrifugal pumps depends on:

Impeller shape

Speed

Vibration

Medium charateristics

Bearing and shaft load

Heat dissipation-particularly with regard to

insulated volute casings and the corrosion resistance of materials

The net positive suction head of the working condition and NPSH

MHT series pump is a centrifugal pump of horizontal, single stage, single suction, cantilever design, its technical requirement conform to ISO5199. The pump is a centrifugal pump of horizontal,axial end suction and radial discharge design. The pump cover is fixed on the frame and is clamped tightly by pump casing and frame.

The company carries out the tests below as standard:

Hydrostatic pressure test

Hydrostatic pressure test based on clean water at ambient temperature, test pressure is 1.5 times on design pressure.

Performance test

Measurement according to ISO9906, accuracy class ll,acceptance class 2B.

NPSH test

According to ISO5199 standard.

Vibration test

According to ISO5199, vibration lightness level is controlled at class A.

Temperature test

Test the temperature rise of bearing, and keep records.

Raw material inspect

Spare and casting parts inspection,to ensure the reliability of the whole machinery.

Mechanical seal: According to customer's requirements
We provide:
1. Mechanical seal---171(A) mechanical seal (this kind of seal is the national-patented product, patent No. ZL92 2 20977.4 ) single or dual MS.
2. Dynamic seal.
3. Packing gland seal.
Or other brands.
Coupling: Pin type coupling
Usage:
Soda, paper, salts. Metallurgy, acid-making, petrochemical, fiber, plastic, paper-making, chemical fertilizer. Fermentation, environmental protection.
Please. Visit our web site to get more information of this